TreadMate® Quarry Tile Floor Cleaner, 60 X 2 fl oz
DILUTION RATE: One pack makes 4 gallons.
Professional strength formula eliminates slippery floors by removing grease build-up. Safe yet effective combination of glycolic and citric acids and powerful detergents penetrates deep into tile cracks and grout lines. TreadMate™ does not leave a slippery alkaline residue. Use on quarry tile, ceramic tile, concrete, brick, and vinyl floors.
Directions
1. Fill mop bucket to 4 gal. level (15 L) with HOT water and add
entire contents of one pack.
2. Apply solution directly from mop bucket using mop. Do not
wring mop out.
3. Using deck brush, scrub floor vigorously making sure grout
lines are thoroughly cleaned.
4. Squeegee the soiled solution to the floor drain. If there are no
floor drains, pick up residue with a mop.
5. Rinse floor thoroughly with CLEAN water using a CLEAN mop.
6. Dry floor with squeegee or air dry.
IMPORTANT: Change rinse water frequently to avoid redepositing soil on floor.
FOR TDS GO TO http://www.stearnspkg.com/all_tek/706tek.pdf
FOR MSDS GO TO http://www.stearnspkg.com/msds/MSDS-TREADMATE-QUARRY-TILE-FLOOR-CLEANER.pdf
